Cateva comenzi utile pentru mIRC in cazul in care esti op sau nu
*-------------------------------------------------------------------------*
NOTES regarding SYNTAX and PARAMETERS:
* Parameters enclosed in <> are mandatory.
* Parameters enclosed in are optional.
* x|y means x or y.
* refers to a user's current nickname.
* refers to the username account that a user has registered
with
CService, not to be confused with . For more information about
username accounts and how to determine someone's username, refer to
the
INFO and VERIFY commands.
* All commands shown with the field can also work with a
nickname by preceding the nickname with an equal (=) sign.
For example, consider a user with the nickname ^Test^ and the
username
Test2K3. The ACCESS command can be performed on this user in
either of these methods:
/msg x access <#channel> Test2K3
/msg x access <#channel> =^Test^
The first method directly queries X as to whether or not the username
Test2K3 is in the channel userlist.
The second method has X verify if ^Test^ is authenticated, and if so,
performs the ACCESS lookup on his username account, Test2K3.
This can be performed with any command that requires a ,
but
will only work if the user is authenticated, otherwise X will reply
with
"No Match!"
* refers to any search string utilizing wildcards (* and ?).
A *!*userid@host string is one example of a wildcard pattern.
For example, both the ACCESS and LBANLIST commands accept :
/msg x access <#channel> ?irc*
/msg x lbanlist <#channel> *.users.undernet.org
The ACCESS command would return any usernames on the channel who
matched
the ?irc* wildcard string.
The LBANLIST command would return all bans set for users who had
enabled
Undernet's virtual hostmask (usermode +x).
NOTE for SCRIPTERS:
* IRC scripts should always use /msg x@channels.undernet.org for all
commands, not just LOGIN, to ensure the command gets sent to X in the
event of a temporary nick change for X or other unforeseen
circumstances
which could render your script temporarily unusable.
---------------------------------------------------------------------------
LEVEL 500 (Channel Manager)
---------------------------------------------------------------------------
PART - Tells X to part your channel. To have X remain out of the
channel,
refer to SET AUTOJOIN.
/msg X part <#channel>
SET - Sets flags for your channel. Flags are special settings that
tell X
how to behave under certain conditions.
/msg X set <#channel>
AUTOJOIN - When this flag is ON, X will always join the channel
when
it returns online (eg. after maintenance or
a netsplit).
/msg X set <#channel> autojoin
MASSDEOPPRO - The maximum deops X will allow a user (see note) to
perform
within 15 seconds. Any user
exceeding this will be deopped and, if on the
channel userlist, suspended for 5
minutes. They will also have a level
25 ban placed on them and will
need to unban themselves after the
suspension expires.
NOTE: The current version of MASSDEOPPRO only checks when users
perform
deops with the /mode command, not with X's DEOP command.
/msg X set <#channel> massdeoppro <0-7>
NOOP - When this flag is ON, X will not allow any other users to
be
opped. However, you and all your level 100+ ops
will still have full access to all op commands
and after you Login you can use X to kick, ban, etc
/msg X set <#channel> noop
STRICTOP - When this flag is ON, X will only allow authenticated
level 100+ users be opped.
/msg X set <#channel> strictop
---------------------------------------------------------------------------
LEVEL 450+ (Trusted Channel Admin)
---------------------------------------------------------------------------
JOIN - Tells X to join the channel. To have X always join the
channel
automatically, refer to SET AUTOJOIN.
/msg X join <#channel>
SET - Sets flags for the channel. Flags are special settings that
tell X
how to behave under certain conditions.
/msg X set <#channel>
* Flags and Values:
AUTOTOPIC - This flag makes X reset the topic to the channel
DESCRIPTION and URL every 30 minutes.
Note that if the channel is
idle, the topic will not be reset
during that time. (active = users joining)
/msg X set <#channel> autotopic
DESCRIPTION - Sets the channel description (80 characters max),
which
can be seen in the CHANINFO reply. If
no description text is
specified, the current description is
cleared.
Alias: DESC
/msg X set <#channel> description
/msg X set <#channel> desc
FLOATLIM - Toggles the channel "floating limit" feature on or off.
If
enabled, X will reset the channel limit
(channel mode +l) within a
preset margin above the number of users in
the channel, and within a
preset period of time. This can help prevent
large botnets from
joining and flooding the channel. By
default, this feature is off.
When enabled, the FLOATLIM flags will be
displayed in the STATUS
reply.
Example STATUS reply:
"Flags set: FLOATLIM (MGN:3, PRD:20, GRC:1, MAX:0)"
In this example, FLOATLIM is ON, with a FLOATMARGIN of 3, a
FLOATPERIOD of 20 seconds, a FLOATGRACE of 1, and FLOATMAX is OFF.
Refer to SET FLOATGRACE, SET FLOATMARGIN, SET FLOATMAX, and SET
FLOATPERIOD for more information.
/msg X set <#channel> floatlim
FLOATGRACE - Sets a grace value for the floating limit feature. If
the difference between the current
limit and what the new limit
would be is less than the grace
value, X will not reset the limit,
so that quiet channels are not
littered with mode changes.
This value can be between 0-19. The
default value is 1.
/msg x set <#channel> floatgrace <0-19>
FLOATMARGIN - Sets the user margin for the floating limit. The
limit
that X resets will be: FLOATMARGIN
+ the current number of users in
the channel. This value can be
between 2-20. The default value is 3.
/msg X set <#channel> floatmargin <2-20>
FLOATMAX - Sets a maximum limit for the floating limit setting.
When enabled, X will not reset the
channel limit higher than FLOATMAX.
This value may be from 0-65536. The
default value is 0 (Off).
/msg X set <#channel> floatmax <0-65536>
FLOATPERIOD - Sets the time period, in seconds, before X resets
the
channel limit. The value may be from
20-200. The default value is 20
seconds.
/msg X set <#channel> floatperiod <20-200>
KEYWORDS - Sets the keywords for the channel (80 characters max).
Keywords should be separated by a space.
/msg X set <#channel> keywords
MODE - This will save the current channel modes as default. When X
joins the channel, it will reset those modes if it
is alone in the
channel.
/msg X set <#channel> mode
URL - You can state the channel's web site URL(s) with this
option (75 characters max). The URL can be viewed in
the CHANINFO
reply or by logging into
then
clicking "Channel Information" and submitting the
channel name.
If no URL is specified, the current URL setting is
cleared.
/msg X set <#channel> url
USERFLAGS - Set the default AUTOMODE for when a new user is added
to
the userlist. Default value is 0.
Values: 0 = None, 1 = Op, 2 = Voice.
/msg X set <#channel> userflags <0-2>
Refer to MODINFO AUTOMODE for more information.
---------------------------------------------------------------------------
LEVEL 400+ (Userlist Admin)
---------------------------------------------------------------------------
ADDUSER - Adds a user to the channel's userlist. You cannot add a
user
with equal or higher access than your own.
/msg X adduser <#channel>
CLEARMODE - Clears all channel modes. Can be used when the channel
has
been locked up (channel modes +i, +l,
and/or +k).
NOTE: This is not necessarily the best method to gain entry to your
channel, because other people or bots may be opped in the
channel that
may reset the modes as you clear them. Refer to the
STATUS command
for related information.
/msg X clearmode <#channel>
MODINFO - The following commands can be used to make changes to
existing
users in the channel's userlist. You cannot
modify someone with an
equal or higher level.
/msg X modinfo <#channel>
ACCESS - Changes the access level of a user. Access level can be
set
between 1 and your access level -1 (ie. if you
have an access level
of 400, you may assign a level of up to 399 to
other users).
You can not modify your own access and can only
modify an access lower than your own.
/msg X modinfo <#channel> access
AUTOMODE - Changes the automode of a user to one of these
specified
modes: NONE, OP, or VOICE. Based on this
setting a user can be voiced
or opped when he joins the channel, or if
the user is already on the
channel, the automode will take place
once the user is authenticated
with X.
/msg X modinfo <#channel> automode
REMUSER - Removes a user from the channel database. You must have
higher
access than the user you want to remove. You can
also remove yourself
from any channel, as long as you are not the
Channel Manager (500 access
level in that channel). Channel Managers wishing
to remove themselves
will need to purge their channel, or transfer
the channel to another
user.
/msg X remuser <#channel>
---------------------------------------------------------------------------
LEVEL 200 (Userlist Op)
---------------------------------------------------------------------------
KICK - Makes X kick all users matching the specified *!*userid@host
mask, but does not kick the person issuing the command
if they match
also. Use should be limited to extreme channel flooding
or clones. You
may wish to set a ban on the mask, or +i (invite-only)
on the channel
before issuing the kick to prevent matching users from
rejoining after
being kicked. Your username will be placed in the kick
message, enclosed
in parentheses.
/msg X kick <#channel>
STATUS - Displays all channel flags and settings, channel modes, the
number of users and ops in the channel, currently
authenticated users for
the channel, and whether X is on the channel or
not. Currently
authenticated users are shown in a
"username/nickname " format. A
user's nickname will only be shown if that user is
currently on the
channel, otherwise only their username and level
are displayed.
The ability to see channel modes is extremely helpful in case the
channel
is locked up (channel modes +i, +l, and/or +k). If the channel has a
key
(+k), X will display the current channel key. You may use the INVITE
command to have X invite you into the channel, overriding all current
channel modes, or alternatively, you may use the CLEARMODE command to
clear all channel modes, then join the channel.
/msg X status <#channel>
---------------------------------------------------------------------------
LEVEL 100+ (Channel Operator)
---------------------------------------------------------------------------
DEOP - Deops one or more persons in the channel. If no nick is
specified, and you are opped on the channel, X will deop
you.
/msg X deop <#channel> ...
OP - Ops one or more persons in the channel. If no nick is specified,
and you are not opped on the channel, X will op you.
/msg X op <#channel> ...
INVITE - X will invite you into the channel, allowing you to join
regardless of current channel modes.
/msg X invite <#channel>
SUSPEND - Suspends a user's access to X on the channel's userlist for
the specified period of time, at the specified
level, if given. If a
level is not specified, X will use your access
level. You can only
suspend someone with access lower than your own.
The maximum duration
is 372 days (8928 hours, 535680 minutes).
* M = minutes, H = hours, D = days
/msg X suspend <#channel>
UNSUSPEND - Unsuspends a user's access to X on the channel's
userlist.
You can only unsuspend a user with access
lower than your own, provided
that the suspension level is also less than
or equal to your access level.
/msg X unsuspend <#channel>
---------------------------------------------------------------------------
LEVEL 75+ (New Channel Operator)
---------------------------------------------------------------------------
BAN - Adds a specific *!*userid@host to X's channel banlist.
If the user is online, you can specify their nick, and X
will
automatically ban the *!*userid@host for that user.
Bans that cover a broader range than previously set bans will replace
the
previous bans. Any user in the channel who matches the ban will also
be
kicked if the ban level is 75+. The duration is in hours, with a
maximum
of 336 hours (2 weeks). The ban level can range from 1 to your own
level.
The ban reason can be a maximum of 128 characters.
If no duration and/or level is specified, the default will be a
duration
of 3 hours at level 75.
NOTE: If the banned user has Undernet's "virtual hostmask" (user mode
+x)
enabled, X is able to see through it to their actual
host, so banning
their username via *!*@username.* will also ban their
actual host.
* Ban Levels: 1-74 = Prevents the user from having ops (+o) on
the channel.
75-500 = Prevents the user from joining the
channel.
/msg X ban <#channel>
UNBAN - Removes a ban from X's channel banlist, and also any matching
bans from the current channel banlist. You can only
remove bans from X's
banlist that are equal to or less than your own
access. To search X's
banlist, refer to the LBANLIST command. To view the
current channel
banlist, refer to the BANLIST command.
/msg X unban <#channel>
---------------------------------------------------------------------------
LEVEL 50+ (Trusted Channel Regular)
---------------------------------------------------------------------------
KICK - Makes X kick someone from the channel. Your username will be
placed in the kick message, enclosed in parentheses.
/msg X kick <#channel>
TOPIC - Makes X change the topic in the channel (145 characters max)
and
includes your username, enclosed in parentheses, at
the beginning of the
topic.
NOTE: If a DESCRIPTION or URL has been set and AUTOTOPIC is ON,
the channel topic will be reset in 30 minutes, unless the
channel is
idle.
/msg X topic <#channel>
---------------------------------------------------------------------------
LEVEL 25+ (Channel Regular)
---------------------------------------------------------------------------
DEVOICE - Devoices one or more users in the channel.
/msg X devoice <#channel> ...
VOICE - Voices one or more users in the channel.
/msg X voice <#channel> ...
---------------------------------------------------------------------------
LEVEL 1+ (Minimum Access)
---------------------------------------------------------------------------
BANLIST - Displays the channel banlist.
/msg x banlist <#channel>
REMUSER - At this level, and above, you can remove yourself from any
channel, as long as you are not the Channel
Manager (Access Level 500 in
that channel). Channel Managers who wish to
remove themselves must purge
the channel, or transfer the channel to another
user.
/msg X remuser <#channel>
STATUS - Displays all channel flags and settings, the number of users
and ops in the channel, currently authenticated
users for the channel,
and whether X is on the channel or not. Currently
authenticated users are
shown in a "username/nickname " format. A
user's nickname will
only be shown if that user is currently on the
channel, otherwise only
their username and level are displayed. At this
level, you won't see channel modes.
/msg X status <#channel>
ACCESS - Looks up access information for a certain user via nick or
username, or multiple users via wildcard pattern.
The information
displayed is: access level, automode if applicable,
suspension status and
level if suspended, and when the user was last
seen. If there are more
than 15 results, log into
to see the
entire list by clicking on the "Channel
Information" link and submitting
the channel name. You can also combine these
options to get specific
results.
/msg x access <#channel> <*|pattern|username|=nickname>
* - shows the entire channel access list.
/msg x access <#channel> *
pattern - shows the access level of all usernames matching the
wildcard pattern.
/msg x access <#channel>
username - shows the access level of a single user.
/msg x access <#channel>
=nickname - shows the access level of a single user by nickname.
/msg x access <#channel> <=nickname>
-min - shows only users above the given level.
/msg x access <#channel> -min
-max - shows only users below the given level.
/msg x access <#channel> -max
-op - shows only users with the OP AUTOMODE flag.
/msg x access <#channel> -op
-voice - shows only users with the VOICE AUTOMODE flag.
/msg x access <#channel> -voice
-none - shows only users with no AUTOMODE flag (None).
/msg x access <#channel> -none
-modif - shows who last modified the access listing.
/msg x access <#channel> -modif
CHANINFO - Displays whether or not a channel is registered, to whom,
and the currently set DESCRIPTION and URL, if
any.
Alias: INFO
/msg x chaninfo <#channel>
/msg x info <#channel>
INFO - Displays information about a username such as their nick and
userid@host if they are currently online, their language
and invisible
settings, last seen information, and whether they may
have been suspended
by a CService Administrator. If used on yourself, it
also shows your
registered email address, the last hostmask
(nick!userid@host format)
used when the username was logged into, and lists all
channels which you have access on
(only CService and you can see this information, not
other users).
If you wish to make this information hidden to the
public, refer to the SET INVISIBLE command.
/msg X info
ISREG - Checks if a channel is registered or not.
/msg X isreg <#channel>
LBANLIST - Searches X's banlist for the specified string. Use * to
see
the whole list, or specify a wildcard pattern to find specific bans.
If
there are more than 15 results, log into
to see the entire list by clicking
on
the "Channel Information" link and submitting the channel name.
/msg x lbanlist <#channel>
---------------------------------------------------------------------------
LEVEL 0 (Everyone)
---------------------------------------------------------------------------
LOGIN - This loads your access listing into memory and authenticates
you
for all registered channels which you have access on.
Remember: No one from CService will ever ask you for
your password! Do
NOT give out your password to anyone claiming to be
CService!
/msg x@channels.undernet.org login
NOTE : You can hide your real IP with /mode nickname-here +x
+x is a user mode which enables Undernet's "Virtual Hostmask," which
will
mask your true host/IP address with
.users.undernet.org.
Other users will see this virtual hostmask instead of your actual
host/IP
address. CService Admin and IRC Ops can see through +x, as can X,
however. You will always be able to see your true host/IP, of
course.
Unlike the virtual hostmask mode that some other IRC networks use,
Undernet’s cannot be unset; the user must disconnect from Undernet to
disable it.
MOTD - Displays X's "Message of the Day."
/msg X motd
SET - Changes special modes for your username.
/msg x set
INVISIBLE - Toggles the invisibility setting for your username info.
When this setting is on, another user cannot
see if you are online, or
see any of your username info using the INFO
command.
/msg X set invisible
LANG - Selects the language in which X will reply to you.
/msg X set lang
Languages available:
Code - Language
• ar - Arabic
• ca - Catalan
• ch - Christmas
• de - German
• dk - Danish
• ea - Easter
• en - English
• es - Spanish
• fr - Français
. gr - Greek
• ha - Halloween
• hu - Hungarian
• it - Italian
• mk - Macedonian
• nl - Dutch
• no - Norsk
• pt - Portuguese
• ro - Romanian
• sv - Svenska
• tr - Turkce
SHOWCOMMANDS - Shows all the commands you can use on a channel,
according
to your access level. If no
channel is specified, only level 0 commands
are shown.
/msg X showcommands
SHOWIGNORE - Shows X's current ignore list. X automatically sets a 1
hour
ignore on anyone who accidentally or
intentionally floods it.
NOTE: X will not reply to you if you are being ignored. If you don't
receive replies from X, ask a friend to check the ignore list for
you.
/msg X showignore
SUPPORT - An alternate method allowing you to confirm or deny support
for a channel application which you are listed
as a supporter on. Upon
authenticating, X will notify you of any channel
applications that you
are listed as a supporter on and will also notify
you of this SUPPORT
command. Alternatively, you can choose to view
the application on the web
to see more information about it, post an
objection, and confirm or deny
your support from there. The command will not be
effective if you are not
listed on a channel as a supporter, or a channel
does not have a pending
application on the web.
/msg X support <#channel>
VERIFY - Displays whether or not a person is logged in, and if so
displays their username, and also indicates whether
or not they are an
Official CService Administrator, Developer, or
Representative,
and/or an IRC Operator.
/msg X verify
*-------------------------------------------------------------------------*
04.08.2006
3KB
Acesta este un site este dedicat unui server de Counter Strike 1.6:
cs.neb.idle.ro
